Search results

The purpose of this paper is to reveal the transient thermo-elasto-hydrodynamic lubrication mechanism of a bidirectional thrust bearing in a pumped-storage unit, and to propose the transient simulation method of two-way fluid-solid-thermal interaction of thrust bearing.

The transient fluid-solid-thermal interaction method is used to simulate the three-dimensional lubrication of the thrust bearing, during the start-up and shutdown process of a pumped storage unit. A pad including an oil hole is modelled to analyze the temporal variation of lubrication characteristics, such as the film pressure, thickness and temperature, during the transient operation process.

The injection of the high-pressure oil sufficiently affects the lubrication characteristics on film, in which the hysteresis phenomena were found between the start-up and shutdown possess.

This paper reveals the transient lubrication mechanism of tilting pad in a thrust bearing, by means of transient fluid-solid-thermal interaction method. Lubrication characteristics are simulated without assuming the temperature relationship between the oil film inlet and the outlet and the heat transfer on the pad free surface. This paper provides a theoretical basis for the safe design and stable operation of thrust bearings.

This paper aims to establish a piecewise Maxwell stress analytical model of bearingless switched reluctance motor (BSRM) for the full rotor angular positions. The proposed model varies from the existing models, which are only applicable to the partial-overlapping positions of stator and rotor poles. By extending the applicable rotor angular positions, this model provides a basic analytical model for the multi-phase excitation control of BSRM.

The full rotor angular positions are classified into the partial-overlapping positions and the non-overlapping positions. At first, two different air gap subdividing methods are proposed, respectively, for the two-position ranges. Then, different integration paths are selected accordingly. Furthermore, two approximate methods are presented to calculate the average flux density of each air gap subdivision. Finally, considering the mutual coupling between the two perpendicular radial suspension forces, a piecewise Maxwell stress analytical model is derived for the full rotor angular positions of BSRM.

A piecewise Maxwell stress analytical model of BSRM is built for the full rotor angular positions, and applicable to the multi-phase excitation mode of BSRM. For the partial-overlapping positions and the non-overlapping positions, two sets of air gap subdividing methods, integration paths and approximate calculation methods of air gap flux densities are proposed, respectively. The accuracy and reliability of the proposed model are verified by the finite element method.

The piecewise Maxwell stress analytical model of BSRM for the full rotor angular positions is proposed for the first time. The novel air gap subdividing methods, integration paths, approximate calculation methods of air gap flux densities and the coupling between the two radial suspension forces are adopted to improve the modeling accuracy. As the applicable range of rotor angular position is extended, this model overcomes the limitation of the existing models only for single-phase excitation mode and contributes to the accurate control of BSRM multi-phase excitation mode.

JingWei BIAN is Director of Urban Construction Environment and Resources Committee of Xiamen Municipal People's Congress. He graduated from Tongji University with doctor's degree in urban planning and design. He is Professorate Senior Urban Planner and National Registered Urban Planner. He is a part-time Professor at Xiamen University, Huaqiao University and Jimei University. He has served as President of Xiamen Urban Planning and Design Institute and Deputy Director of Xiamen Planning Bureau. His main research interests are the urban planning theory and design, urban traffic planning, urban and rural planning management and regulations. He has published 4 books and over 50 papers on these topics.

Suspension is a significantly important component for automotive and railway vehicles. Regenerative hydraulic-electric shock absorbers (RHSA) have been proposed for the purpose of attenuating vibration of vehicle suspension, and also recover kinetic energy originated from vehicle vibration that is conventionally dissipated by hydraulic dampers. To advance the technology, the paper aims to present an RHSA system for heavy-duty and railway vehicles and create a dynamic modelling to discuss on the development process of RHSA model.

First, the development of RHSA dynamic model can be resolved into three stage models (an ideal one, a second one with an added accumulator and a third one that considers both accumulator and system losses) to comprehensively evaluate the RHSA's characterisation. Second, a prototype is fabricated for testing and the results meet desired agreements between simulation and measurement. Finally, the study of key parameters is carried out to investigate the influences of hydraulic-cylinder size, hydraulic-motor displacement and accumulator pre-charged pressure on the RHSA system.

The findings of sensitivity analysis indicate that the component design can satisfy the damping characteristics and power performance required for heavy-duty vehicle, freight wagon and typical passenger train. The results also show that reducing the losses is highly beneficial for saving suspension energy, improving system reliability and increasing power-conversion efficiency.

The paper presents a more detailed method for the development and analysis of a RHSA. Compared with the typical shock absorbers, RHSA can also recover the vibration energy dissipated by suspension.

China has recently introduced a new audit law that aims to increase the scope of audit supervision and raise the standards for preventing risks in auditing national public projects. This paper presents a systematic research study on the causes of audit risks in national public projects and discusses the process by which these causes contribute to the emergence of such risks. Furthermore, the paper investigates the core risk sources in various types of national construction project audit. This paper aims to provide theoretical support for auditors of national construction projects in risk avoidance when conducting audits.

In this study, the authors carefully selected five national public audit projects from China and performed a comprehensive analysis of 85 relevant audit documentation. The textual analysis was conducted using Nvivo12 software, and the grounded theory approach was adopted for generalization purposes.

Based on the research results, the findings suggest that there are five key causes contributing to the audit risk of national construction projects: professional competence, risk awareness, management capacity, level of attention and deliberate fraud. The most critical factor identified is management capability, with 59.93% of the data supporting this view. This conclusion was based on an analysis of state-owned enterprises, administrative organs and public institutions. Building upon this, a framework titled “the mechanism of audit risk factors with management capability as the core” was constructed.

This paper employs qualitative analysis methods to examine national construction projects in China, contributing new literature to the theoretical study of audit risk management. The article also provides practical recommendations for auditors on how to mitigate audit risks and improve the quality of audit services in national project governance.

The purpose of this study is to address a significant gap in the understanding of entrepreneurship at the microfoundation level. It focuses on how individual entrepreneurs, specifically Hongbang entrepreneurs in China from 1896 to 1949, shape and transform their contexts. The aim is to provide a deeper understanding of the mechanisms that facilitate entrepreneurial success.

The study adopts a microhistorical approach, investigating the case of Hongbang entrepreneurs in China during 1896-1949. It involves an in-depth examination of historical records to explore the strategic interactions between these entrepreneurs and core stakeholders such as consumers, financial intermediaries, government regulators, and human resources. The research methodology emphasizes a process-oriented view, examining the evolution of personalized networks into extensive connections.

The research reveals that Hongbang entrepreneurs successfully reshaped their unfavorable embedded contexts by strategically collaborating with key stakeholders. They influenced consumer tastes, allied with financial intermediaries, negotiated with governments on regulation policies, and developed human resource stocks. The transformation was facilitated by the evolution of their networks from personalized to extensive connections. These findings highlight the localized strategies such as cronyism in resource acquisition within China’s private property development industry.

This study contributes to the field by offering insights into entrepreneurial contextualization and networking. It sheds light on the complex interplay between entrepreneurs and their contexts, providing a nuanced understanding of localized strategies in the Chinese context. The findings add value to the discourse on entrepreneurship by elucidating the strategic and processual acts through which entrepreneurs engage with stakeholders and reshape their environments.

The purpose of this paper is to extract electrochemical reaction kinetics parameters, such as Tafel slope, exchange current density and equilibrium potential, which cannot be directly measured, this study aims to propose an improved particle swarm optimization (PSO) algorithm.

In traditional PSO algorithms, each particle’s historical optimal solution is compared with the global optimal solution in each iteration step, and the optimal solution is replaced with a certain probability to achieve the goal of jumping out of the local optimum. However, this will to some extent undermine the (true) optimal solution. In view of this, this study has improved the traditional algorithm: at each iteration of each particle, the historical optimal solution is not compared with the global optimal solution. Instead, after all particles have iterated, the optimal solution is selected and compared with the global optimal solution and then the optimal solution is replaced with a certain probability. This to some extent protects the global optimal solution.

The polarization curve plotted by this equation is in good agreement with the experimental values, which demonstrates the reliability of this algorithm and provides a new method for measuring electrochemical parameters.

This study has improved the traditional method, which has high accuracy and can provide great support for corrosion research.

This paper aims to the improvement of permanent magnet shape in the popular permanent magnet synchronous machine (PMSM) is proposed in this paper in view to mitigate cogging torque magnitude and torque ripple.

A two-dimensional exact analytical approach of magnetic field distribution is established for the PMSM considering magnet shape and slot opening. The optimal magnet shape is constituted of small number of layers stacked radially. The thickness of each magnet layer is considered equal to about one mm or more; however, a parametric study was performed to determine pole pitch ratio value. The finite element method is used to validate the analytical results.

Cogging torque peaks and torque ripples can be mitigated significantly more than 90 per cent compared to results issued from machine having classical magnet shape. Raising the number of magnet layers can give better results. The results of this paper are compared also with those issued from the machine having sinusoidal magnet shape and give a good solution.

A new technique for cogging torque and torque ripple mitigation is proposed in this paper by changing permanent magnet shape. The proposed final magnet shape is constituted of a set of stacked and well-dimensioned layers relative to the opening angle.

Environmental performance (EnPerf) needs to be critically studied so organizations can understand enhancing it. The purpose of this study is mainly to examine and explain the influence of beliefs and values of the human resources regarding religiosity (REL) and workplace spirituality (WS) on shaping an environmentally friendly work culture comprising environmental ethics (EE) and environmental passion (EP), to enhance EnPerf.

A survey methodology was used, and 316 responses were collected from the employees working in industries on the top list of polluting the environment using purposive sampling. Structural equation modeling was deployed to test the hypotheses.

This research is conducted to identify specific relationships of variables with the environment. It was discovered that WS affected EP and EE, positively affecting EnPerf.

This study guides organizations and their management to adopt WS, EE and EP, as these all increase EnPerf in the organization.

Not much work has been conducted on the environmental culture based on REL and WS, using the ability-motivation-opportunity theory. This research analyzes employees’ intrinsic factors, such as REL and WS, to develop EP and EE. Thus helping to comprehend how they can use to enhance EnPerf, which is the current priority for the organizations.